Frequently Asked Questions

Is the Lamber F85 Marine suitable for my boat or vessel?

The F85 Marine is a model to consider for an onboard galley, but suitability needs to be checked against your vessel’s services, available space and operating requirements.

Tell us your vessel type, location, washing volume and existing equipment. We’ll help you identify what needs confirming before you purchase.

Will it run on our vessel’s electrical supply?

The listed configuration is 440 V, three-phase plus neutral, 60 Hz, with a total connected load of 6.65 kW.

Your vessel’s electrician or marine electrical contractor should verify compatibility with the exact machine being supplied. Do not assume it will connect to an ordinary power outlet or an existing dishwasher connection.

Send us the electrical specifications available onboard and a photograph of your current machine’s rating plate.

Can we run it from a generator or shore power?

That depends on your electrical system.

Your electrical contractor needs to assess voltage, frequency, phase, available capacity and the other equipment operating at the same time. Having a generator or shore-power connection does not automatically establish compatibility.

Confirm this before ordering, particularly if you switch between different power sources.

Can the dishwasher operate while the vessel is moving?

We have not verified manufacturer-approved limits for operation during vessel movement, including heel, roll or pitch.

Before planning to use it underway, obtain confirmation of the permitted operating conditions and installation requirements for the supplied model. We can help request the relevant documentation.

Does the machine need to be secured to the vessel?

The mounting arrangement needs to be assessed for your installation.

Do not assume that placing the machine beneath a bench provides suitable restraint. Your installer should confirm the approved mounting method, connection arrangements and access needed for maintenance.

Any required brackets or restraints should be identified in the equipment and installation quote.

Will it fit through our hatchways and into the galley?

The listed machine dimensions are 600 mm wide × 650 mm deep × 820 mm high.

Check the complete delivery route, including gangways, doors, hatchways, stairs and tight turns—not just the space beneath the bench.

You’ll also need room to open the door, handle racks and access the machine for servicing. Send photographs and measurements of any restricted access points before delivery is arranged.

What water supply does it need?

The listed inlet-water temperature is 45–50°C.

Water pressure, water quality and the complete connection requirements still need to be confirmed against the installation documentation. Tell us whether your water comes from onboard storage, a watermaker or a shore connection so the proposed arrangement can be assessed.

Do not assume seawater is an approved supply.

How much freshwater will it use?

We’ll confirm the current water-consumption specification for the exact machine before providing an estimate.

Your overall freshwater requirement also includes initial filling, tank changes, cleaning and any pre-rinsing. The wash-tank capacity alone does not tell you how much water the machine will consume throughout a service.

Tell us how many loads you expect to wash and how long you operate between water replenishments.

Can it connect to our vessel’s existing wastewater system?

This needs checking against the dishwasher’s drainage requirements and your vessel’s wastewater arrangement.

Provide the waste-connection location, height and details of any existing pump or collection system. We’ll confirm whether the proposed machine and drainage package are suitable before installation is arranged.

Will it keep up with meals for our passengers and crew?

The best starting point is your busiest meal service.

Tell us how many people you serve, how quickly dishes return and whether the machine will also wash cups, bowls and utensils. We’ll consider the available time, staffing and loading routine when helping you assess capacity.

For larger operations, a different machine type or more than one washing station may be worth considering.

Can it wash our plates, cups and galley cookware?

Suitability depends on each item’s dimensions, material and cleaning requirements.

Send measurements or photographs of your largest plates, serving dishes and cookware. Items must fit correctly in a suitable rack and be appropriate for machine washing.

If heavily soiled pots and pans are your main requirement, ask us to assess whether a dedicated pot washer would be more suitable.

Does it have the approvals our vessel requires?

Any required vessel-specific approvals or documentation must be checked before purchase.

We have not confirmed a particular marine classification, flag-state approval or acceptance for your vessel. If your marine surveyor, operator or technical manager requires specific documentation, send those requirements with your enquiry so they can be checked against the exact model.

Can you arrange installation while we are in port?

Tell us your berth or marina, expected arrival and departure dates, access arrangements and preferred installation window.

We’ll confirm whether we can accommodate the location and work required before booking. Any specialist marine electrical, plumbing or mounting work should be identified during planning.

Is installation free on a vessel?

Installation may be free, depending on the setup and work required.

Vessel access, lifting, restricted working space, mounting and changes to services may involve additional costs. We’ll confirm the agreed installation scope and charges before you approve the quote.

Will you remove our old dishwasher?

Yes, we can arrange removal when installing your replacement, subject to confirming access and the work involved.

Tell us the old machine’s dimensions and whether removal involves stairs, hatchways, lifting equipment or restricted berth access. Any applicable charges will be included in your quote.

What warranty does Worldwide CDM provide?

Worldwide CDM provides a 24-month parts and labour warranty with your Lamber purchase, subject to warranty terms.

Before purchasing for a vessel, ask us to clarify service locations, access requirements and any travel or attendance charges. Do not assume warranty assistance includes attendance at sea or in every port.

What happens if the dishwasher breaks down while we are away?

Contact Worldwide CDM with the model, serial number, location and a description of the fault. Include photographs or displayed fault information where available.

We’ll discuss the assistance available and the next steps. Attendance, parts supply and repair arrangements depend on your location and access to the vessel; an onboard or remote-port response should not be assumed.

What information should we send for an accurate quote?

Please include:

• Vessel name, type and usual berth or operating location.

• Your contact details and preferred installation dates.

• Passenger and crew numbers, plus your busiest meal-service requirements.

• Existing dishwasher model and rating-plate photograph.

• Available electrical supply details.

• Water-supply and drainage information.

• Galley measurements and photographs.

• Delivery-route restrictions, including hatchways and stairs.

• Any required approvals or technical documentation.

• Whether you need old-machine removal, additional racks or accessories.

We’ll use these details to help assess suitability and prepare a quote with clear inclusions.