Lamber GS800DP Underbench Dishwasher Sales Sydney & Central Coast
Find the right dishwasher for your kitchen—with confidence
When dishes start holding up service, you need a replacement that suits your workload, available space and existing connections.
The Lamber GS800DP commercial underbench dishwasher offers a fixed two-minute cycle, a 450 × 450 mm basket and a drain pump as standard. Its front-loading format makes it an option to consider for kitchens planning an underbench washing area.
Worldwide CDM helps businesses across Sydney and the Central Coast assess equipment before purchasing. We’ll discuss your kitchen, explain installation requirements and provide a clear quote so you know what your replacement involves.
Is the Lamber GS800DP right for your business?
The GS800DP may suit cafés, restaurants and other hospitality venues looking for an underbench commercial dishwasher.
It is an option to consider if you need:
A front-loading machine for an underbench wash area.
A fixed washing cycle for a straightforward operating routine.
A dishwasher using 450 × 450 mm baskets.
A machine with a drain pump.
Included detergent and rinse-aid pumps.
Help checking installation requirements and arranging old-machine removal.
Suitability depends on your busiest service, dish sizes and kitchen layout. We’ll help you assess whether this model can support your workload or whether another machine would be a better fit.
Unsure whether the GS800DP is right for your kitchen?
Tell us what you wash, how busy your venue gets and how much space you have. You don’t need to choose a model before asking for advice.
Published output is a guide. Actual throughput depends on loading, preparation, operating conditions and time between racks. Water consumption per cycle does not represent total daily water use.
We’ll confirm the supplied machine’s dimensions, electrical requirements and installation clearances before you proceed.
Features that matter when choosing your dishwasher
A fixed two-minute cycle
A consistent cycle gives your team a straightforward washing routine.
Allow time for scraping, loading, unloading and any recovery between cycles when assessing how the machine will perform during your busiest service.
A 450 × 450 mm basket
The GS800DP uses a 450 × 450 mm basket. Check your existing racks before planning to reuse them.
Send us the measurements of your largest plates and other items so we can help assess fit. Rack size and door opening both matter when choosing a machine.
Drain pump included
A drain pump is supplied as standard.
Your waste connection still needs to meet the machine’s installation requirements. We’ll review the drainage arrangement before confirming suitability.
Detergent and rinse-aid pumps
The published equipment includes detergent and rinse-aid pumps.
Let us know if you have an existing chemical supplier or dosing arrangement. We’ll discuss what is needed for installation and setup.
Will the GS800DP fit your current kitchen?
A replacement needs to suit the complete wash area, including working space and connections.
We’ll discuss:
The available opening beneath your bench.
Space to open the door and handle loaded racks.
Electrical supply and outlet suitability.
Water supply and waste connections.
Access for installation, cleaning and servicing.
Space for dirty dishes, clean dishes and rack storage.
Delivery access and removal of your existing machine.
The published dimensions describe the machine itself. They should not be treated as the complete installation space required.
Electrical requirements
The GS800DP listing specifies a 15-amp GPO.
Tell us what connection your current dishwasher uses. We’ll confirm the requirements for the supplied machine and identify any electrical work needed before installation.
Water and drainage
Send photographs of the water inlet, waste connection and surrounding cupboard or bench space.
Although the machine includes a drain pump, the drain position and connection arrangement still need checking.
Bench opening and door clearance
Measure the available width, depth and height, together with the working space in front of the machine.
The published width information is inconsistent, so we’ll confirm the exact measurement before approving a tight-fitting installation.
Installation of your new machine and removal of the old one
We’ll help you understand the installation work before you commit.
Installation may be free, depending on your kitchen setup and the work required.
If changes to plumbing, electrical connections, benches or access are needed, additional charges may apply. Your quote will explain the agreed work and costs.
We can also remove your old machine when installing your replacement. Include this in your enquiry so we can confirm access, removal arrangements and any applicable charges.
Confirm your complete equipment package
Your quote should identify the machine, accessories and services being supplied.
Tell us if you need:
Additional compatible racks.
Cutlery baskets.
Suitable detergent and rinse aid.
Water treatment assessment.
Delivery and installation.
Changes to existing connections.
Removal of your old dishwasher.
We’ll confirm rack quantities and other inclusions in your quote. Accessories and surrounding equipment shown in images are not automatically included.
24-month parts and labour warranty
When you purchase your Lamber GS800DP through Worldwide CDM, we provide a 24-month parts and labour warranty, subject to warranty terms.
If you experience a problem, contact our team. We’ll explain the next steps and help arrange appropriate assistance.
We’ll also discuss the installation, operating and maintenance requirements relevant to your machine.
Which Lamber underbench dishwasher should you choose?
The right machine depends on your kitchen’s requirements.
Alongside the GS800DP, we can help you compare the GS900DP, GS900DP-RO, GS900DP-XL, F85MARINE, F92-DY-HS/F92MARINE and S510 dishwasher/glasswasher.
We’ll assess suitable options against:
Your washing volume during peak periods.
The size and type of items being washed.
Available bench space and loading room.
Existing electrical, water and drainage connections.
Your budget and preferred installation timing.
If an underbench machine would struggle with your workload, we can also discuss suitable pass-through options.
24-month parts and labour warranty
When you purchase your Lamber GS800DP through Worldwide CDM, we provide a 24-month parts and labour warranty, subject to warranty terms.
If you experience a problem, contact our team. We’ll explain the next steps and help arrange appropriate assistance.
We’ll also discuss the installation, operating and maintenance requirements relevant to your machine.
Which Lamber underbench dishwasher should you choose?
The right machine depends on your kitchen’s requirements.
Alongside the GS800DP, we can help you compare the GS900DP, GS900DP-RO, GS900DP-XL, F85MARINE, F92-DY-HS/F92MARINE and S510 dishwasher/glasswasher.
We’ll assess suitable options against:
Your washing volume during peak periods.
The size and type of items being washed.
Available bench space and loading room.
Existing electrical, water and drainage connections.
Your budget and preferred installation timing.
If an underbench machine would struggle with your workload, we can also discuss suitable pass-through options.
Why choose Worldwide CDM?
Advice informed by repairs and servicing
We work with commercial equipment beyond the point of sale. Our team considers installation, everyday operation and ongoing maintenance when helping you choose a machine.
A family-owned business with over 30 years’ industry experience
We understand that replacing equipment can interrupt service and create uncertainty. We’ll listen to your requirements and explain your options clearly.
Clear costs before you commit
Your quote will identify the agreed equipment, installation services and additional work so you can assess the complete cost.
Support after installation
Worldwide CDM provides commercial equipment servicing, repairs and parts assistance across Sydney and the Central Coast.
You have a team to contact about maintenance, performance concerns and warranty assistance.
Get your Lamber GS800DP quote in three easy steps
1. Tell us about your kitchen
Send your business location, washing requirements, current machine details and preferred replacement timing. Include photographs and measurements where possible.
2. Review your recommendation and quote
We’ll assess suitability and confirm pricing, availability, installation requirements, accessories and old-machine removal.
3. Arrange installation
Once you approve the quote, we’ll confirm the next steps and organise a suitable installation time.
Frequently Asked Questions
How much does the Lamber GS800DP cost?
Request a quote for current pricing and availability.
Your total will depend on the machine, accessories, delivery, installation and any removal work required.
Is the GS800DP suitable for my café or restaurant?
It may be, depending on your washing volume, dish sizes and available space.
Tell us about your busiest service and the items you need to wash. We’ll help you assess suitability before ordering.
How many plates can it wash per hour?
The published output is 350 plates per hour.
Actual results depend on rack loading, preparation, operating conditions and the time between loads. We’ll consider your practical workflow when recommending a machine.
What size racks does it use?
The GS800DP uses 450 × 450 mm baskets.
Check your existing racks before planning to reuse them. We can help confirm compatible options.
Does it include a drain pump?
Yes. A drain pump is listed as standard.
The waste connection must still be checked against the machine’s installation requirements.
Are detergent and rinse-aid pumps included?
Yes. Both are listed in the published equipment details.
We’ll confirm the supplied configuration and discuss your chemical setup before installation.
Will it fit beneath my existing bench?
We need to check the opening and operating clearances.
The listed depth is 550 mm and height is 820 mm. Published width information differs between 530 mm and 535 mm, so we’ll confirm this before ordering.
What electrical connection does it need?
The published listing specifies a 15-amp GPO.
We’ll confirm the supplied machine’s connection requirements and whether your existing installation is suitable.
Is installation free?
Installation may be free, depending on your kitchen setup and the work required.
Any additional work and charges will be explained before you approve the quote.
Will you take away our old dishwasher?
Yes, we can arrange removal when installing your replacement.
Please include this in your enquiry so we can confirm access, arrangements and any applicable charges.
What warranty does Worldwide CDM provide?
We provide a 24-month parts and labour warranty with your Lamber GS800DP purchase, subject to warranty terms.
How quickly can you supply and install it?
Timing depends on availability, your location and the installation work required.
Tell us if your current machine has failed or you have an opening deadline. We’ll check the options and confirm a realistic timeframe.
Can you help us decide whether to repair or replace?
Yes. Send the model, approximate age and fault details for your existing machine.
Because we provide repairs and equipment sales, we can help you consider both options, subject to any inspection required.